- Category: EME
- Published on Tuesday, 19 April 2011 12:09
- Written by 4Z5LV
- Hits: 48126
There is short description of my 23cm EME setup:
- First one is "old" setup is containing 1.8m dish and Azimuth/Elevation mechanic
My first QSO with PI9CAM was done at 8:40 UTC 10-07-2010 using 1.8m dish and 10W output power.
Further I had built single MRF-286 W6PQL amplifier that gave me 50W output to feed.
Next step - I added to the dish above 1.8m dish "extra size", extended it by mesh up to 2.6m diameter, shape is not exactly parabolic, but gave me gain improvements close to expected
Currently I had built 2xMRF286 amplifier of W6PQL design, it give me now near 100W only, but I have not finished its tuning yet.
So my present EME Setup is:
Transverter: self maid 1296Mhz/28Mhz + Yaesu FT897D / AFEDRI SDR (on RX)
Antenna: 2.6m dish (1.8m SatTV dish extended by mesh)
LNA: G4DDK ~0.3dBNf
PA: 100W amplifier (2xMRF-286 W6PQL design)
There you can download and hear recorded I/Q file of DUBUS CW EME Contest that was done on my system using AFEDRI SDR receiver + 1296MHz/28MHz transverter.
next page has information about my dish's Azimuth/Elevation control.
- Next >>